A receiver is the fact that large, heavy factor that you simply plug your loudspeakers along with other components into (just like a DVD player, TV, Compact disc player, Xbox 360, Ps, ipod device, and etc.). It is the "brain" from the show, really. The thought of hooking up all of your components to home stereo receivers is the idea of audio/video switching, permitting you to definitely change to different video sources (like TV, DVD, video camera) in your TV and therefore altering the audio source accordingly - all without touching not the receiver.
Clearly, the main purpose behind audio/video switching getting a receiver is always to drive audio to exterior sound system, like multichannel surround sound or stereo system system sound system.
Most receivers have a plethora of inputs; up to 8 speakers and a subwoofer (more commonly, 5.1, or five speakers and a subwoofer), several video inputs, and even HDMI inputs. You could plug your Xbox, Plasma, and DVD player into the receiver and use one remote to switch between all the different video sources (games, TV, DVD video) and have your speakers pump out surround-sound.
Let's start with inputs and outputs. If you don't understand something, read through the entire How-To as most of it will be explained in detail.
Keep in mind that a receiver is the hub of your entire home theater, so this How-To will actually guide you through the basics of connecting your complete home theater.
So what the heck is all this 'stuff' on the back of your receiver?
I will discuss nearly something that you'd find around the rear of the receiver. The primary one I'm basing the following information from can be a Harman Kardon AVR-247 I'm likely to start with the most effective left in the unit and work my way right, then I'll begin in the left in the next row and so on.
The first three inputs are for antennas. An FM antenna cable would slide on to the first jack while two speaker wires would plug into the remaining slots for AM. Of course, you don't have to plug your antennas in, but if you'd like AM/FM reception through your speakers, you'll want to go ahead and do that. These are standard connections, so if you lose one of your antennas, just go buy another for a few bucks.
You've probably heard of composite video. Its a very basic video connection used by most any component (TV, DVD, VCR especially). Its common and its cheap. As such, its very low quality.
Composite uses an RCA cable for video (yellow) and a pair of more RCA cables for audio (red-colored-colored and white-colored, stereo system system). The problem would be that the composite video cable combines luminance and chrominance inside the same cable, lowering the standard in the picture. You lose plenty of sharpness, as well as the color begins to degrade within the original source. Its useful if you would like the extra input or perhaps the device you're connecting up only has composite video. Otherwise, use another factor, like component video. Sounds similar different.
Clearly, the main purpose behind audio/video switching getting a receiver is always to drive audio to exterior sound system, like multichannel surround sound or stereo system system sound system.
Most receivers have a plethora of inputs; up to 8 speakers and a subwoofer (more commonly, 5.1, or five speakers and a subwoofer), several video inputs, and even HDMI inputs. You could plug your Xbox, Plasma, and DVD player into the receiver and use one remote to switch between all the different video sources (games, TV, DVD video) and have your speakers pump out surround-sound.
Let's start with inputs and outputs. If you don't understand something, read through the entire How-To as most of it will be explained in detail.
Keep in mind that a receiver is the hub of your entire home theater, so this How-To will actually guide you through the basics of connecting your complete home theater.
So what the heck is all this 'stuff' on the back of your receiver?
I will discuss nearly something that you'd find around the rear of the receiver. The primary one I'm basing the following information from can be a Harman Kardon AVR-247 I'm likely to start with the most effective left in the unit and work my way right, then I'll begin in the left in the next row and so on.
The first three inputs are for antennas. An FM antenna cable would slide on to the first jack while two speaker wires would plug into the remaining slots for AM. Of course, you don't have to plug your antennas in, but if you'd like AM/FM reception through your speakers, you'll want to go ahead and do that. These are standard connections, so if you lose one of your antennas, just go buy another for a few bucks.
You've probably heard of composite video. Its a very basic video connection used by most any component (TV, DVD, VCR especially). Its common and its cheap. As such, its very low quality.
Composite uses an RCA cable for video (yellow) and a pair of more RCA cables for audio (red-colored-colored and white-colored, stereo system system). The problem would be that the composite video cable combines luminance and chrominance inside the same cable, lowering the standard in the picture. You lose plenty of sharpness, as well as the color begins to degrade within the original source. Its useful if you would like the extra input or perhaps the device you're connecting up only has composite video. Otherwise, use another factor, like component video. Sounds similar different.
|
0 nhận xét: