It rocks the soul and soothes the mind. It forms an integral part of most cultures around the world. It is one of the few aspects of life on earth that has remained relevant as time has passed while evolving as the times change. Rhythmic tunes such as those produced by steel pan music are simply indispensable to people from all walks of life. Making steel pans, is as you can imagine, quite an intricate process.

A musical instrument that has deep and immediate ties to the Caribbean, the steel pan has traditionally been linked with Calypso ad other West Indian based musical art forms. One nation though, Trinidad and Tobago, is the first that comes to mind when this instrument or the sounds it creates are mentioned. This is because this island nation is actually the literal foundation of the music.

The love of this musical instrument has grown so much that the sounds it produces have found their way into basically every genre of music. Bands of musicians use them to create sounds in reggae, rhythm and blues and almost every other musical genre. Clearly this sound is a rather diverse one, since it can blend seamlessly into the sounds of multiple genres.

Experts make steel pans with their hands and the process requires much skill and energy. They tend to start off by selecting the ideal metal drum to make the pan. This is an important step because the drum selected will, in the end, determine the type of sound produced and anyone who listens to the music these instruments produce will realize that they create a variety of sounds.

After selecting their ideal drums, they have to sink the bottom. They do this by beating the closed end of the drum in with a heavy hammer. This creates a bowl-like appearance. Some drums may burst during this process. The ones that usually burst at this point are those that are rusted, heavily dented or extremely thin. This is another reason to pay keen attention to drum quality during the selection phase.

After sinking the drums, experts have to identify the areas that will produce the various notes. They do this by drawing on the bottom. The spaces that are left out are then flattened. The flattening is achieved through the use of a special tuning hammer. Experts call this the counter sinking process. Like the previous phase, this one tests the mettle of the drum being used and is a step that has to be cautiously executed.

After the pans have been through the sinking and counter sinking stages of the process, there are other adjustments that they must undergo. These steps add tot he drums' ability to produce varying desired sounds. After the physical manipulation, the drums are coated with a protective layer using either a powder coating or the traditional chrome plating or painting. The final stage for them is a fine tuning and blending phases. At this point, they are ready for the market.

A steel pan goes through a very detailed and intricate process before it gets to the musician. The sounds that people around the world enjoy so much are the products of, not just the musical talent using it but also the expert craftsmen who exert much effort and expertise in making it.