Those days only a cassette player was available in a car. But these days music has taken the predominant form in CD and DVD. If you still own a cassette player in any car you can easily switch over to a CD player and modernize your car yourself. This can be done at a low cost as an after market CD player can be installed. But how to install a CD player?
One of the things to be noted while buying a new CD player is its size. Make sure that the CD player is of perfect size as provided in the dash board. While searching for a new in dash CD player care must be taken so that the model of your car as different cars have different make based on their model. It is also important to buy a car stereo connector for the wiring and an in dash CD player kit. This makes the work look more professional.
First locate for the wire running from the CD player, using a stripper strip the wire to half an inch, The same procedure is to be repeated for all the wires provided with wire connector, make sure only the insulation part is removed without damaging the core portion of the wire.
The first thing to do is to remove the insulation of quarter to half inches from the front and back end of the wire emerging from the back side of the music player. While removing the insulation it should be done in such a way that the wiring connections are not damaged.
With the help of your car owner's manual remove the dash board covers from its place. Now take the new disk player and stereo wiring connector that you have purchased from the market and insert it into the dash install kit. Now connect the automobile's connector to the car stereo wiring connector. Push the connectors together. You will hear a click when the connection is complete.
There will be a vacant space available just to the back side of the CD player. Use this to place the remaining wires securely. Now place the disk player and the dash installation kit inside the automobile. Now to keep the CD player secure, screw the dash installation kit to the automobile using the same holes left by removing the old cassette player.
After that, he car stereo player along with its wiring connector are placed on the dashboard and are adjusted so that it completely rests within the space provided and should also be properly fit. Now the Car stereo wiring connector and the wire connector of the vehicle are to be properly linked this can be checked with the click sound produced by the connectors when they are linked.
One can modernize the car by knowing how to install an in - dash CD player, and these steps helps to know it.
One of the things to be noted while buying a new CD player is its size. Make sure that the CD player is of perfect size as provided in the dash board. While searching for a new in dash CD player care must be taken so that the model of your car as different cars have different make based on their model. It is also important to buy a car stereo connector for the wiring and an in dash CD player kit. This makes the work look more professional.
First locate for the wire running from the CD player, using a stripper strip the wire to half an inch, The same procedure is to be repeated for all the wires provided with wire connector, make sure only the insulation part is removed without damaging the core portion of the wire.
The first thing to do is to remove the insulation of quarter to half inches from the front and back end of the wire emerging from the back side of the music player. While removing the insulation it should be done in such a way that the wiring connections are not damaged.
With the help of your car owner's manual remove the dash board covers from its place. Now take the new disk player and stereo wiring connector that you have purchased from the market and insert it into the dash install kit. Now connect the automobile's connector to the car stereo wiring connector. Push the connectors together. You will hear a click when the connection is complete.
There will be a vacant space available just to the back side of the CD player. Use this to place the remaining wires securely. Now place the disk player and the dash installation kit inside the automobile. Now to keep the CD player secure, screw the dash installation kit to the automobile using the same holes left by removing the old cassette player.
After that, he car stereo player along with its wiring connector are placed on the dashboard and are adjusted so that it completely rests within the space provided and should also be properly fit. Now the Car stereo wiring connector and the wire connector of the vehicle are to be properly linked this can be checked with the click sound produced by the connectors when they are linked.
One can modernize the car by knowing how to install an in - dash CD player, and these steps helps to know it.
About the Author:
Purchase at the best prices on Auto Hifi, then visit www.powernetshop.at to find the best advice on Car audio for you. Don't reprint this exact article. Instead, reprint a free unique content version of this same article.
|
0 nhận xét: